Batavia Bicycle Commission on Facebook

from Batavia Bicycle Commission Link to FB

Common Causes for Collisions with Bicycle The average cyclists can easily reach speeds of 10-15 mph. A car can reach much higher speeds than the average bicycle, and motorists often underestimate a cyclist’s speed. Collisions with bicycles are often a result. Intersections are the most common place for a cyclist to be involved in an injury causing collision(1). These collisions result from either underestimating the cyclist’s speed or not seeing the cyclist in the roadway. These scenarios include the Drive Out (or Right Cross), the Left Cross, and the Right Hook. The accompanying image highlights each of these situations and provides defensive driving tips for cyclists. Additional causes of vehicle-bicycle collisions include the Sideswipe (car passing too close), Rear Ending (car following too close), and Dooring (opening car door into path of cyclist). In the US, distracted driving resulted in a 30% rise in cyclist fatalities in the US from 2005 to 2010(2). A study by the NHTSA found that looking away from the road for as little as 2 seconds was enough time to significantly increase accident risk(3). Over the time it takes (5 seconds) to read or send a text, at 30mph a driver will cover 220 feet (3/4 the length of a football field) with their eyes off the road! Expecting to see cyclists on the road and knowing how to safely travel the roads with them will create much safer roads in our community. (1) National Highway Traffic Safety Administration. Traffic Safety Facts 2012: A Compilation of Motor Vehicle Crash Data from the Fatality Analysis Reporting System and the General Estimates System. Publication DOT HS 812 032. U.S. Department of Transportation, n.d. https://ift.tt/2QBiBXL. (2) Klauer, S. G., Dingus, T. A., Neale, V. L., Sudweeks, J. D., & Ramsey, D. J. (2006). The impact of driver inattention on near-crash/crash risk (3) NHTSA. Distracted Driving. https://ift.tt/3e8ohkV #BikeBatavia, #BikeSafety, #ShareTheRoad

Batavia Bicycle Commission on Facebook

from Batavia Bicycle Commission Link to FB

What is Dooring? Anywhere street parking is permitted, dooring is a concern for cyclists. Dooring occurs when a motorist suddenly and quickly opens the door in the path of the cyclist causing the cyclist to crash into the door. Even if the cyclist attempts to swerve to miss hitting the door, there may not be enough time to fully clear the door. Swerving also puts the cyclist at risk of being hit by traffic. Dooring a cyclist always results in injury to the cyclist and can even be fatal(1). An easy way to avoid dooring a cyclist is by practicing what is known as the Dutch Reach. To perform the Dutch Reach, the occupant of the vehicle (driver or passenger) uses the far hand to open the door. Using the far hand forces the occupant to look over their shoulder as they open the door and also prevents the door from being thrown open. As of 2019, the Dutch Reach is part of the Illinois Rules of the Road and taught to every new driver(2). If you do not currently use the Dutch Reach (https://ift.tt/3gP4qbW) when exiting your vehicle, start today! The more you do it, the more it will become second nature and ultimately it may save someone’s life. (1) Greenfield, J. (2018, Sept. 06). 2 Cyclists Killed and Critically Injured in 2 Days Shows Need for More Dooring Awareness. StreetsBlogChicago. https://ift.tt/3dZ8kNM (2) HB5143, 100th General Assembly (IL 2018). https://ift.tt/32X18LR #BikeBatavia, #BikeSafety, #ShareTheRoad

Batavia Bicycle Commission on Facebook

from Batavia Bicycle Commission Link to FB

Passing Cyclists on the Road As a motorist, there will be times when you encounter a cyclist travelling in the lane in front of you. Whether the cyclist is travelling in the right-hand side of the lane or closer to the center, passing the cyclist is permitted when safe and legal to do so. The motorist must not exceed the posted speed limit when passing and, according to Illinois law, must also pass at a minimum distance of 3 feet from the cyclist. If oncoming traffic or other obstacles prevent you from providing the 3 foot minimum distance, you must remain behind the cyclist at a safe distance. In a no passing zone, Illinois law does allow motorists to pass cyclists when the cyclists are travelling at less than half of the posted speed limit. Again, the motorists cannot exceed the posted speed limit when passing and still must provide the 3 foot minimum distance from the cyclist. #BikeBatavia, #BikeSafety, #ShareTheRoad

Batavia Bicycle Commission on Facebook

from Batavia Bicycle Commission Link to FB

Cyclists are Vulnerable Road Users While bicycles are considered vehicles under Illinois law, a bicycle is far different from other vehicles on the road. The average weight of a bicycle ranges from 20-30lbs, but the average weight of a car is around 4,000lbs! Also, the driver of a bicycle sits on top of their vehicle while most other vehicles safely enclose their drivers inside. This puts bicycle riders in a much more vulnerable position compared to other road users. When looking at distance traveled by road user type, cyclists have been shown to have fatality rates 3-10.2 times higher than motorists(1). In 2019, there were 846 cyclists killed and 49,000 injured across the US(2). Early estimates of cycling deaths in the US for 2020 are 697 individuals(3). Many of these deaths could have been prevented through a combination of education and awareness. (1) Bluejay, M. Bicycle Safety Almanac. https://ift.tt/2QXXnD4 (2) National Center for Statistics and Analysis. (2020, December). Overview of motor vehicle crashes in 2019. (Traffic Safety Facts Research Note. Report No. DOT HS 813 060). National Highway Traffic Safety Administration. (3) Fox, M. & Whelan, L. (2021, January 29) What We Learned from Tracking Cycling Deaths for a Year. Outside Online. https://ift.tt/3eAy2XV #BikeBatavia, #BikeSafety, #ShareTheRoad

Batavia Bicycle Commission on Facebook

from Batavia Bicycle Commission Link to FB

Motorists and Cyclists Even if you don’t personally ride a bicycle, you should be familiar with the Illinois Bicycle Rules of the Road. By understanding the rights and requirements of cyclists on the road, motorists will know what to expect when they encounter a cyclist. In addition, the 2020 Illinois Rules of the Road provides important information for motorists as they navigate Illinois roadways in the presence of cyclists (pages 42-44). The most important take-a-way is that a cyclist is legally allowed to ride on the road and should be treated as any other vehicle you may encounter. In your daily driving, you encounter a variety of different vehicles: cars, trucks, vans, etc. A bicycle is just another type of vehicle that is used to move people from one place to another! #BikeBatavia, #BikeSafety, #ShareTheRoad

Batavia Bicycle Commission on Facebook

from Batavia Bicycle Commission Link to FB

How Are You Visible? Today, share what makes you visible. Let’s see those lights, reflectors, etc. that makes everyone take notice and helps to ensure you have a safe ride. What do you recommend to your fellow cyclists to be visible and stay safe? #BikeBatavia, #BikeSafety, #ShareTheRoad

Batavia Bicycle Commission on Facebook

from Batavia Bicycle Commission Link to FB

Wear Light Colored Or Reflective Clothing :: When headed out for a bicycle ride during the day, consider wearing light colored clothing. White and yellow clothing has been shown to provide greater visibility of daytime cyclists and detection by motorists compared to darker colors (such as grey and black)(1). Fluorescent colored clothing provides maximum daytime visibility and detection, with fluorescent red, orange and yellow colors being the most effective1. Fluorescent high-vis clothing reflects the light from the sun allowing it to be highly visible during daylight. Once night falls, light colored and fluorescent clothing no longer provide a benefit for visibility. Under these conditions, reflective clothing will increase the visibility of cyclists by reflecting light from vehicle headlights and other light sources. When looking for reflective clothing options, look for items with large reflective areas. The American National Standards Institute recommends the minimum reflective area for road crew on roads less than 50mph be at least 201 in2 (12in X 16.75in)(2). While fewer cyclists ride after dark, the highest rate of cycling related fatalities occurs during this time(3). Whether you are an avid or recreational cyclist, if you plan on riding after sunset, you should consider adding a reflective vest or jacket to your cycling gear. (1) Kwan, I., & Mapstone, J. (2004). Visibility aids for pedestrians and cyclists: a systematic review of randomised controlled trials. Accident Analysis & Prevention, 36(3), 305-312. (2) SafetyGear Corporation. Explaining the Classes of an ANSI Safety Vest. https://ift.tt/32A4bcx (3) Jaermark, S., Gregersen, N. P., Linderoth, B. 1991. The use of bicycle lights #BikeBatavia, #BikeSafety, #ShareTheRoad

Batavia Bicycle Commission on Facebook

from Batavia Bicycle Commission Link to FB

Use Bike Reflectors, Reflective Tape, and Reflective Bands :: There are a variety of visibility aids available to cyclists to help increase their detection by motorists. Reflectors are the most basic of these aids and bicycles are required under CPSC guidelines to have a clear front reflector, red rear reflector, pedal reflectors, and wheel-mounted side reflectors. While the standard reflectors are a good start to making a cyclist visible, they should not be the only tool relied on for visibility. Reflective tape is an easy way to significantly increase your visibility on the road, especially at night. For maximum effectiveness and greatest visibility, reflective tape should be applied to the rear frame of the bike (1). In addition, reflective bands that can be attached to your lower leg/ankle can provide additional visibility. The benefit of these bands comes from their placement – in a location of consistent movement. The movement of a cyclist’s legs creates a distinct, recognizable motion that when illuminated at night allows for motorists to more quickly see the cyclist and react accordingly (2). 1. Costa, M., Bonetti, L., Bellelli, M., Lantieri, C., Vignali, V., & Simone, A. (2017). Reflective tape applied to bicycle frame and conspicuity enhancement at night. Human factors, 59(3), 485-500. 2. Wood, J. M., Tyrrell, R. A., Marszalek, R., Lacherez, P., Carberry, T., & Chu, B. S. (2012). Using reflective clothing to enhance the conspicuity of bicyclists at night. Accident Analysis & Prevention, 45, 726-730. #BikeBatavia, #BikeSafety, #ShareTheRoad

Batavia Bicycle Commission on Facebook

from Batavia Bicycle Commission Link to FB

Be Seen! :: When you are riding in the presence of motorists, it is crucial that you know the motorist sees you. Whenever possible, make eye contact with the driver and be aware of the driver’s blind spots. Even if you have the right of way, don’t assume it is safe to proceed. Researchers have identified a troubling phenomenon called “looked-but-failed-to-see” (LBFTS) crashes where a driver reports never seeing the cyclist even when they have looked right at them1. Due to the speed at which a vehicle travels, the driver needs to process all of the visual data in a very short amount of time. Researchers suggest that drivers don’t see cyclists because their brain has been conditioned to only look for other motorists. The incidence of LBFTS crashes has been found to increase with driver experience (1). The more we drive the more our brain learns to focus on the most dangerous aspects of driving (cars) filtering out other “less important” information (e.g. cyclists and pedestrians). On the positive side, researchers have shown that motorists who also cycle are more likely to see and react to cyclists on the road (2). So the more time you spend on your bike, the more likely you will notice other cyclists when you are the motorist. The more we all see and recognize cyclists on the road, the safer everyone can travel. Ride Illinois is offering yard signs to help spread this message. If you are interested in a sign for your yard, visit their Start Seeing Bicycles page for more information. (1) Herslund, M. B., & Jørgensen, N. O. (2003). Looked-but-failed-to-see-errors in traffic. Accident Analysis & Prevention, 35(6), 885-891. (2) Robbins, C. J., & Chapman, P. (2018). Drivers’ visual search behavior toward vulnerable road users at junctions as a function of cycling experience. Human factors, 60(7), 889-901. #BikeBatavia, #BikeSafety, #ShareTheRoad

Batavia Bicycle Commission on Facebook

from Batavia Bicycle Commission Link to FB

Show Us Your Helmet! :: Wearing a bike helmet can get a bad rap. Some people may feel it’s “not cool” or that a helmet will “ruin my hair.” In reality, wearing a bike helmet and sporting helmet hair is cool! Today, share your cool helmet look below. We look forward to seeing all of you in the community enjoying your bike ride in style and safety! #BikeBatavia, #BikeSafety, #ShareTheRoad

Batavia Bicycle Commission on Facebook

from Batavia Bicycle Commission Link to FB

Life of a Helmet:: Now that you have a helmet, it is important to understand that it does not last forever. Despite how well you have treated your helmet, over time  the outer shell can become cracked or brittle, the straps and other components can wear out and break. Also, how and where you store your helmet can affect its longevity. For these reasons, the CPSC recommends replacing your helmet every 5-10 years1. This will also ensure that your helmet has the current safety features and design. In the event of a fall, your helmet MUST be replaced. The inner protective foam is designed to compress upon impact in order to absorb the force and protect your head. Bicycle helmets are designed for single impact protection, just like car seats. Once the foam has compressed, it no longer provides protection. Even if there is no visible damage to the helmet, the foam inside may be damaged. There is currently no recycling program for old bike helmets. As with car seats, cut the straps before discarding so that it cannot be used again. Or, come up with creative ways to reuse your old helmets. Flower pots seem to be a popular option! 1. U.S. Consumer Product Safety Commission. (2019, December 31) Which Helmet for Which Activity? https://ift.tt/3ae9R0h #BikeBatavia, #BikeSafety, #ShareTheRoad

Batavia Bicycle Commission on Facebook

from Batavia Bicycle Commission Link to FB

Ensuring a Proper Fit :: A helmet provides great protection to a cyclist’s head but only when worn properly. It is important to always check the position of your helmet as well as the tightness of the chin strap before every ride. A helmet should be positioned across the forehead only 1-2 finger widths above your eyebrows. Wearing your helmet pushed back on the crown of your head will not provide adequate protection in the event of a fall. The straps should form a V-shape under your ears and only 1 finger should fit between the chin strap and your chin. The National Highway Traffic Safety Administration has created a great visual guide for ensuring proper sizing and fit. #BikeBatavia, #BikeSafety, #ShareTheRoad

Batavia Bicycle Commission on Facebook

from Batavia Bicycle Commission Link to FB

Selecting a Bike Helmet All helmets sold in the US must pass the Consumer Product Safety Commission (CPSC) standard (1) . The CPSC standard requires that helmets significantly reduce the impact forces to a cyclist’s head in the event of impact. Bicycle helmets were originally designed to protect against major head trauma and fatality. Recently, there has been a shift in focus to also protecting cyclists from concussion. Bicycling related accidents rank among the top causes of concussions treated in emergency rooms across the US (2). Researchers at Virginia Tech have developed the STAR system to evaluate protection from concussion in the event of impact (3). The STAR system combines additional testing with the CPSC testing protocol resulting in a more robust safety testing system. So far they have evaluated 112 helmets using the STAR equation and have created a searchable website to help you in selecting your next helmet. (1) U.S. Consumer Product Safety Commission. (2019, April 10) Bicycle Helmets Business Guidance. https://ift.tt/2eTU6ls (2) Coronado, V. G., Haileyesus, T., Cheng, T. A., Bell, J. M., Haarbauer-Krupa, J., Lionbarger, M. R., ... & Gilchrist, J. (2015). Trends in sports-and recreation-related traumatic brain injuries treated in US emergency departments: the National Electronic Injury Surveillance System-All Injury Program (NEISS-AIP) 2001-2012. The Journal of head trauma rehabilitation, 30(3), 185. (3)Bland, M. L., McNally, C., Zuby, D. S., Mueller, B. C., & Rowson, S. (2020). Development of the STAR evaluation system for assessing bicycle helmet protective performance. Annals of biomedical engineering, 48(1), 47-57. DOI https://ift.tt/2PT7wRs #BikeBatavia, #BikeSafety, #ShareTheRoad

Batavia Bicycle Commission on Facebook

from Batavia Bicycle Commission Link to FB

Importance of a Helmet Bike helmets serve an important role in bike safety. According to the National Safety Council, head injuries account for 1/3 of all non-fatal bike related injuries (1). Research has found that bike helmets are highly effective in reducing the rates of serious head injuries related to cycling (2). The following infographic hipghlights the safety benefits of helmets and why you should wear one every time you ride. (1) National Safety Council. (2019, May 6) Bicycle Safety Statistics May Surprise You. https://ift.tt/3mGSMkj (2) Høye, A. (2018). Bicycle helmets–To wear or not to wear? A meta-analyses of the effects of bicycle helmets on injuries. Accident Analysis & Prevention, 117, 85-97. #BikeBatavia, #BikeSafety, #ShareTheRoad

Batavia Bicycle Commission on Facebook

from Batavia Bicycle Commission Link to FB

Where do you ride? Where are some of your favorite places to ride? Do you have a favorite stretch of road? A great bike trail? Around your neighborhood? We’d love to know where Batavians bike! Share in the comments below. #BikeBatavia, #BikeSafety, #ShareTheRoad

Batavia Bicycle Commission on Facebook

from Batavia Bicycle Commission Link to FB

Where to Ride in the Lane When riding on the road, cyclists should ride to the right-hand side of the lane whenever possible. Under Illinois law, a cyclist is allowed to ride on the shoulder, but is not required to do so. When riding with traffic, a cyclist is permitted to move toward the center of the lane to avoid debris, rough surfaces or other hazards that may be present. In addition, a cyclist can and should move over to avoid parked cars, leaving additional clearance for vehicle doors to open without hitting them. Illinois law (625 ILCS 5/11-1505) outlines additional conditions where a cyclist is legally allowed in the center or the lane or left of center. The first situation is when the cyclist intends to make a left turn. For a left turn, the cyclist should move to the left side of the lane and signal the intent to turn. Another situation occurs as a cyclist approaches an intersection. In this case, the cyclist should move toward the center of the lane. This would prevent a vehicle planning to turn right from passing the cyclist and possibly causing a collision. Finally, when a cyclist is able to travel at posted traffic speeds, the cyclist is permitted to ride near the center of the lane. This situation often occurs in downtown areas with lower speed limits as well as when travelling down hills. Road signage is beginning to pop-up in places where it is likely that bicycles will travel in the center of the lane. These signs will benefit both cyclists and motorists by alerting all traffic to look for and expect to see bicycles in the lane. #BikeBatavia, #BikeSafety, #ShareTheRoad

Batavia Bicycle Commission on Facebook

from Batavia Bicycle Commission Link to FB

Stopping at intersections Under Illinois law, cyclists are required to make a full stop at all Stop Signs and Red Traffic Lights. While there is a growing movement across the country to legally allow cyclists to treat stops signs as yield signs, Illinois has not yet adopted the Stop as Yield (aka Idaho Stop) for cyclists. Illinois does allow cyclists to treat red traffic lights as stop signs under certain conditions. This applies everywhere across the state, with the exception of Chicago. Under the law, if a cyclist is stopped at a light that fails to change after 2 minutes, the cyclist is then permitted to proceed into the intersection when clear. The cyclists must yield the right of way to any oncoming traffic before entering. #BikeBatavia, #BikeSafety, #ShareTheRoad

Batavia Bicycle Commission on Facebook

from Batavia Bicycle Commission Link to FB

Where to ride When headed out for a bicycle ride, it is important to know where you are allowed to ride your bike. In the city of Batavia, bicycles are not allowed to be ridden on sidewalks throughout downtown. Sidewalks are designed for pedestrians and pedestrians have the right of way when present. While not specifically prohibited, neighborhood sidewalks are too narrow for bicycle traffic, especially in the presence of pedestrians. When riding your bicycle on the road, a cyclist must always ride in the same direction as traffic. It is illegal and dangerous to ride into oncoming traffic. Cyclists may ride 2 abreast as long as they do not impede the flow of traffic. When riding on the road, be predictable – don’t swerve, stop abruptly, or make other unexpected moves. When motorists know what to expect from cyclists, we can all travel safely. #BikeBatavia, #BikeSafety, #ShareTheRoad

Batavia Bicycle Commission on Facebook

from Batavia Bicycle Commission Link to FB

With so many reasons to ride, what's yours? #BikeBatavia #BikeSafety #ShareTheRoad